PSM Fines at AR Refinery

Monday, July 29, 2013 @ 06:07 PM gHale


Martin Operating Partnership LP is facing $126,900 in fines for five safety and health violations, including one willful and one repeat, for deficiencies in the employer’s process safety management program and other workplace hazards at its Smackover, AR, refinery.

The inspection, which began in January, was a follow-up to a 2010 inspection initiated under the agency’s Petroleum Refinery Process Safety Management National Emphasis Program.

RELATED STORIES
Chemical Hazards at Poultry Processor
Safety Fines for Echo Lake Foods
Safety Fines for Houston Manufacturer
Violations at Ford’s Buffalo Plant

Martin Midstream Partners LP owns Kilgore, TX-based Martin Operating Partnership.

Process Safety Management (PSM) encompasses a detailed set of requirements and procedures employers must follow to address hazards proactively that are associated with processes and equipment that use large amounts of hazardous chemicals. In this case, it involves the production of naphthenic crude oil.

The one willful violation involves failing to ensure relief valves were properly sized and of adequate capacity to provide relief, for units such as, but not limited to, Crude Unit #1. A willful violation is one committed with intentional, knowing or voluntary disregard for the law’s requirements, or with plain indifference to worker safety and health.

The repeat violation involves failing to ensure process safety information included the relief system design for a Crude Unit. A repeat violation exists when an employer previously faced citations for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years. The company received a similar violation in a 2010 inspection.

Three serious violations were for failing to ensure intervening block valves, upstream and downstream of relief devices, were locked in the open position; ensure process hazard analysis recommendations for facility siting were resolved in a timely manner; and ensure energy control procedures were written to specifically relieve stored energy. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

“Process safety management prevents the unexpected release of toxic, reactive or flammable liquids and gases in processes involving highly hazardous chemicals,” said Carlos Reynolds, OSHA’s area director in Little Rock. “It’s vital that Martin Operating Partnership ensure safeguards are in place to protect the safety of workers.”



Leave a Reply

You must be logged in to post a comment.