Vibration Energy Powers Electronics

Friday, February 21, 2014 @ 06:02 PM gHale


There may soon be a way to charge smartphone batteries without an electrical cord.

Incorporated directly into a cell phone housing, a nanogenerator could harvest and convert vibration energy from a surface, such as the passenger seat of a moving vehicle, into power for the phone.

RELATED STORIES
Simulating Neutron Behavior in a Reactor
Duckweed Great Biofuel Potential
Hybrid Fuel Cell Energy from Biomass
Graphene for Wireless Communications

“We believe this development could be a new solution for creating self-charged personal electronics,” said Xudong Wang, an assistant professor of materials science and engineering at the University of Wisconsin-Madison.

The nanogenerator takes advantage of a common piezoelectric polymer material called polyvinylidene fluoride, or PVDF. Piezoelectric materials can generate electricity from a mechanical force; conversely, they also can generate a mechanical strain from an applied electrical field.

Rather than relying on a strain or an electrical field, the researchers incorporated zinc oxide nanoparticles into a PVDF thin film to trigger formation of the piezoelectric phase that enables it to harvest vibration energy. Then, they etched the nanoparticles off the film; the resulting interconnected pores — called “mesopores” because of their size — cause the otherwise stiff material to behave somewhat like a sponge.

That sponge-like material is key to harvesting vibration energy. “The softer the material, the more sensitive it is to small vibrations,” Wang said.

The nanogenerator itself includes thin electrode sheets on the front and back of the mesoporous polymer film, and the researchers can attach this soft, flexible film seamlessly to flat, rough or curvy surfaces, including human skin. In the case of a cell phone, it uses the phone’s own weight to enhance its displacement and amplify its electrical output.

The nanogenerator could become an integrated part of an electronic device, like its back panel or housing, and automatically harvest energy from ambient vibrations to power the device directly.

Wang said the simplicity of his team’s design and fabrication process could scale well to larger manufacturing settings.

“We can create tunable mechanical properties in the film,” he said. “And also important is the design of the device. Because we can realize this structure, phone-powering cases or self-powered sensor systems might become possible.”



Leave a Reply

You must be logged in to post a comment.