Working to Cut Fuel Cell Costs

Monday, March 2, 2015 @ 12:03 PM gHale

An inexpensive metal-free catalyst performs just as well as costly metal catalysts at speeding the oxygen reduction reaction in an acidic fuel cell.

That is a huge development because for almost 50 years, researchers have been trying to replace the precious metal catalysts.

Cleaning Up Oil, Gas Wastewater
Nano-Steel Stronger, Corrosion Resistant
Dinner and a Solar Cell
Thin Material Hikes EV Battery Power

The carbon-based catalyst also corrodes less than metal-based materials and has proved more durable, said researchers at Case Western Reserve University (CWRU).

The findings are major steps toward making low-cost catalysts commercially available, which could, in turn, reduce the cost to generate clean energy from PEM fuel cells, the most common cell used in cars and stationary power plants.

“This definitely should move the field forward,” said Liming Dai, the Kent Hale Smith Professor of macromolecular science and engineering at Case Western Reserve and senior author of the research. “It’s a major breakthrough for commercialization.”

Dai worked with lead investigator Jianglan Shui, who was a CWRU postdoctoral researcher and is now a materials science and engineering professor at Beihang University, Beijing; PhD student Min Wang, who did some of the testing; and postdoctoral researcher Fen Du, who made the materials. The effort builds on the Dai lab’s earlier work developing carbon-based catalysts that significantly outperformed platinum in an alkaline fuel cell.

The group pursued a non-metal catalyst to perform in acid because the standard bearer among fuel cells, the PEM cell, uses an acidic electrolyte. PEM stands for both proton exchange membrane and polymer electrolyte membrane, which are interchangeable names for this type of cell.

The key to the new catalyst is its rationally-designed porous structure, Dai said. The researchers mixed sheets of nitrogen-doped graphene, a single-atom thick, with carbon nanotubes and carbon black particles in a solution, then freeze-dried them into composite sheets and hardened them.

Graphene provides enormous surface area to speed chemical reactions, nanotubes enhance conductivity, and carbon black separates the graphene sheets for free flow of the electrolyte and oxygen, which greatly increased performance and efficiency. The researchers found those advantages ended up lost when they allowed composite sheets to arrange themselves in tight stacks with little room between layers.

A fuel cell converts chemical energy into electrical energy by removing electrons from a fuel, such as hydrogen, at the cell’s anode, or positive electrode. This creates a current.

Hydrogen ions produced end up carried by the electrolyte through a membrane to the cathode, or negative electrode, where the oxygen reduction reaction takes place. Oxygen molecules end up split and reduced by the addition of electrons and combine with the hydrogen ions to form water and heat, which are the only byproducts.

Testing showed the porous catalyst performs better and is more durable than the state-of-the-art nonprecious iron-based catalyst.

Leave a Reply

You must be logged in to post a comment.