Cisco cleared multiple critical vulnerabilities in its Small Business RV160, RV260, RV340, and RV345 Series Routers and in the external authentication functionality of its Secure Email and Web Manager.

The vulnerabilities in Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device.

The vulnerability in the Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device.

In the small business router issues, Cisco released software updates that address these vulnerabilities, according to an advisory. There are no workarounds that address these vulnerabilities.

The vulnerabilities are dependent on one another. Exploitation of one of the vulnerabilities may be required to exploit another vulnerability. In addition, a software release affected by one of the vulnerabilities may not be affected by the other vulnerabilities.

Schneider Bold

The following products are vulnerable to command injection vulnerabilities (CVE-2022-20827 and CVE-2022-20841):

  • RV160 VPN Routers
  • RV160W Wireless-AC VPN Routers
  • RV260 VPN Routers
  • RV260P VPN Routers with PoE
  • RV260W Wireless-AC VPN Routers
  • RV340 Dual WAN Gigabit VPN Routers
  • RV340W Dual WAN Gigabit Wireless-AC VPN Routers
  • RV345 Dual WAN Gigabit VPN Routers
  • RV345P Dual WAN Gigabit POE VPN Routers

A remote code execution and denial of service vulnerability (CVE-2022-20842) affects the following Cisco products:

  • RV340 Dual WAN Gigabit VPN Routers
  • RV340W Dual WAN Gigabit Wireless-AC VPN Routers
  • RV345 Dual WAN Gigabit VPN Routers
  • RV345P Dual WAN Gigabit POE VPN Routers

In one issue, a vulnerability in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition.

This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition.

CVE-2022-20842 is the case number for the vulnerability, which has a CVSS base score of 9.8.

In addition, there is a vulnerability in the web filter database update feature of Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers that could allow an unauthenticated, remote attacker to perform a command injection and execute commands on the underlying operating system with root privileges.

This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting crafted input to the web filter database update feature. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

CVE-2022-20827 is the case number for the vulnerability, which has a CVSS base score of 9.0.

Also, there is a vulnerability in the Open Plug and Play (PnP) module of Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers that could allow an unauthenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system.

This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system. To exploit this vulnerability, an attacker must leverage a man-in-the-middle position or have an established foothold on a specific network device that is connected to the affected router.

CVE-2022-20841 is the case number for the vulnerability, which has a CVSS base score of 8.3.

Meanwhile, Cisco also cleared a critical vulnerability in the external authentication functionality of its Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) that could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device.

This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.

CVE-2022-20798 is the case number for the vulnerability, which has a CVSS base score of 9.8.

Cisco released software updates that address this vulnerability, according to the advisory. There are workarounds that address this vulnerability.

This vulnerability affects Cisco ESA and Cisco Secure Email and Web Manager, both virtual and hardware appliances, if they are running a vulnerable release of Cisco AsyncOS Software and the following are true:

  • The devices are configured to use external authentication.
  • The devices use LDAP as authentication protocol.

To determine whether external authentication is enabled on a device, do the following:

  1. Log in to the web-based management interface of Cisco Secure Email and Web Manager or Cisco ESA
  2. Navigate to System Administration > Users
  3. Go to the External Authentication section

If the Enable External Authentication check box is checked in green, external authentication is enabled.

Cisco confirmed this vulnerability does not affect Cisco Secure Web Appliance, formerly known as Cisco Web Security Appliance (WSA).

There is a workaround that addresses this vulnerability. Administrators can disable the anonymous binds on the external authentication server. This action must be performed on the server that handles external authentication. Administrators should work with their networking teams to implement this workaround. The external authentication feature provided by the Cisco Secure devices should not be hindered by this workaround.

Click here to view other Cisco security advisories.

Pin It on Pinterest

Share This