Cisco cleared a vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers that could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition.

This high-rated vulnerability is due to the incorrect handling of malformed BFD packets received on line cards where the BFD hardware offload feature is enabled.

An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.

Cisco released software updates that address this vulnerability, according to an advisory. There are workarounds that address this vulnerability.

This one advisory is part of the March 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories, click on the Cisco Event Response: March 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication.

Schneider Bold

This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco IOS XR 64-bit Software and have BFD hardware offload enabled for any of the installed line cards:

  • ASR 9000 Series Aggregation Services Routers only if they have a Lightspeed or Lightspeed-Plus-based line card installed
  • ASR 9902 Compact High-Performance Routers
  • ASR 9903 Compact High-Performance Routers

To determine which line cards are installed in the device, use the show platform CLI command.

Cisco ASR 9902 and 9903 Compact High-Performance Routers integrate a Lightspeed-Plus-based line card.

The following line cards are Lightspeed-based:

  • A9K-16X100GE-TR
  • A99-16X100GE-X-SE
  • A99-32X100GE-TR

The following line cards are Lightspeed-Plus-based:

  • A9K-4HG-FLEX-SE
  • A9K-4HG-FLEX-TR
  • A9K-8HG-FLEX-SE
  • A9K-8HG-FLEX-TR
  • A9K-20HG-FLEX-SE
  • A9K-20HG-FLEX-TR
  • A99-4HG-FLEX-SE
  • A99-4HG-FLEX-TR
  • A99-10X400GE-X-SE
  • A99-10X400GE-X-TR
  • A99-32X100GE-X-SE
  • A99-32X100GE-X-TR

For more information about line card type identification, see ASR 9000 Series Line Card Types.

Click here to view other Cisco security fixes.

Pin It on Pinterest

Share This