Germany-based TWK’s TBN/TRN-S4 Series safety magnetic encoders earned SIL2 certification by TÜV.

The TBN/TRN-S4 series, which features increased resolution in the single-turn range (model TBN) and a variety of different applications. The resolution of the sensor system can be up to 16-bits. The detection of the multiturn part, i.e. the number of revolutions (max.12-bit), is done by an absolute multiturn gear (model TRN).

This model series covers the entire spectrum, from large and robust to miniature versions, which can see use in areas that do not require extremely high standards for environmental influences and must be cost-effective.

Gate time can vary to record the speed value. The default value is 100 ms. The gate time can be parameterized from 1 to 1000 ms depending on the requirements, thus enabling extensive use of the speed signal.

Schneider Bold

Users can select various mechanical variants from clamping flange with shaft design, blind shaft for preferably Ø 12 mm, various shaft diameters (Ø6, Ø10 or Ø12 mm), optionally with flattening or feather key or Woodruff key. Specific requirements can also be implemented.

In the TBN58-S4, the radial and axial shaft load is ≥ 250 N. This very high value also allows the use in harsh environments. In order to meet special requirements, versions with a shock load of up to 500 g ±50 g are implemented in separate variants for extreme industrial conditions. In addition to the version made of seawater-resistant aluminum (AlMgSi1), the housing can be supplied in a stainless-steel version (1¤4305 or 1.4404) for special requirements such as offshore applications or requirements from the food industry.

In the TRN58 with CANopen Safety SIL2 and CANopen, the TBN/TRN-S4 series has protection class IP66 and can be used in a temperature range from -40 °C to +85 °C. Especially for extreme requirements, the option of encapsulating the entire housing is available to meet the requirements of IP69K applications. The electromechanical interface can be designed as a cable output or connector output (M12 sensor plug).

In the TRN42-S4, as a controller system, a Cortex 32-bit-controller of the latest generation forms the corresponding hardware platform. For the most diverse applications, various scenarios are also available with regard to shield connection, DC/DC concepts for the supply voltage and the optional electrical isolation of the output signals.

Click her for more information on the TBN/TRN-S4 Series with SIL2 certification.

Pin It on Pinterest

Share This