A “freak fire accident” left one worker dead and 14 others injured at the Karnataka Power Corporation Limited (KPCL) gas power plant in Yelahanka, a suburb of Bangalore in the state of Karnataka, India, officials said.

One of the two engineers, who was critically injured in a heat blast incident that occurred at the 370 MW Gas based Combined Cycle power plant died Monday while the other remains in critical condition. The remaining 12 workers suffered injuries that were not life threatening.

The deceased worker was Balaji Murugan from General Electric, police said.

“There was no blast or something closer to it. It was a ‘freak fire accident’ that occurred during the pre-commissioning and synchronization process,” KPCL said in a statement.

KPCL said it believes oil leaking from a bearing might have caused fire and the flame came from the chamber, resulting in the incident.

Schneider Bold

“The root cause is being analyzed to find out the exact reason behind the incident in the Combined Cycle Gas Power Plant in Yelahanka, which is under construction and commissioning phase. The construction is being done by the Bharat Heavy Electricals Limited (BHEL),” the statement said.

The blast occurred in the KPCL’s Combined Cycle Power Plant in Yelahanka at 3 a.m. (Oct. 2) while engineers were carrying out tests in a gas turbine chamber, said Karnataka state Fire and Emergency Services Director K Shiva Kumar.

“The plant was supposed to commence its operations in December. All day, they had tested. But when they were testing, variations in pressure were observed. This incident occurred when KPCL engineers were conducting several checks to test the turbine,” he said.

An anonymous worker who was present at the scene said in a published report there was a snag in the functioning of the turbine due to high pressure, which resulted in the heat blast.

“The chamber is fully automatic. Chances of a fire accident are minimal in this chamber. The turbine functions on three important materials – natural gas that is used to heat and convert water into steam, the converted steam which helps rotate turbines to produce electricity, andoil pumps used as coolant as turbines produce high temperature heat.

“During one of such experiments, due to high pressure, the oil supply pipe opened up and due to heat and presence of natural gas, it produced highly combustible heat flame which caused the blast, injuring 15 engineers who were working there,” the source said.

The source further added since the entire chamber is automatic, there is a need to know how it failed.

“The entire turbine chamber is automatic. And it is self-efficient to extinguish any fire on its own, as the moment fire and heat sensors send signals, CO2 (carbon dioxide) gas is pumped automatically to put out the fire,” he said.

Pin It on Pinterest

Share This