By Joe Brandel
The manufacturing industry is on the cusp of significant growth, with 2025 projections showing a 4.2 percent increase in overall revenues and a 5.2 percent rise in capital expenditures.

On top of that, employment is also looking to grow modestly, with factory jobs projected to increase by 0.8 percentage points. As manufacturers scale up operations and expand their workforce to meet rising demand, more employees will end up exposed to the inherent hazards of industrial environments.

Despite advancements in safety standards and personal protective equipment (PPE) in recent decades, the manufacturing sector continues to face serious risks on the job floor. These safety measures have driven down injury numbers, but it’s clear there needs to be more work ahead. There’s a critical need for more comprehensive protection.

In 2023, there were over 326,000 reported workplace injuries in the private manufacturing sector. According to a 2024 article, in 2017, most injuries in manufacturing stemmed from slips, trips, and falls (18 percent) and from contact with machinery or equipment (34 percent).

Schneider Bold

To that end, these types of injuries present a serious risk of impact to the head.

Tramatic Brain Injuries

One of the biggest dangers resulting from such accidents is traumatic brain injuries (TBIs), which can have detrimental physical and psychological effects. Each year, around 2.8 million Americans get a TBI, and over 5 million are living with a permanent brain injury-related disability.

Almost half of all TBI-related hospitalizations are a result of a fall. These falls can be so dangerous because the head can become exposed to a variety of forces, including rotational motion. This risk is especially prevalent in environments like manufacturing, where uneven surfaces and dangerous machinery are common daily hazards.

While traditional helmets protect against the transmission of linear forces during an impact or a fall, not all helmets end up designed to protect against the rotational motion that arises from tangential forces when the head impacts something at an angle. For example, if a worker falls and hits their head on the ground, the impact is likely to occur at an angle, which can cause rotational motion to the head and brain.

Rotational motion can cause severe damage, as the brain is subject to a combination of rotational forces (angular acceleration) and rotational energy (angular velocity).Exposure to rotational motion can result in movement of brain cells relative to each other, which can lead to shearing and potential damage to the brain’s axons, the cable transmitters of neurons. Studies have shown the human brain is more sensitive to rotational motion, and concussions or other traumatic brain injuries.

Rotational Motion

To that end, TBIs more often end up caused by rotational motion than linear motion.

Any protection is better than no protection, but there are things to look out for when it comes to choosing the best helmet for a team’s health and safety.The type of helmet worn can be just as important as ensuring that helmets are worn in the first place. Workers should confirm their helmets meet current safety standards and are right for the job at hand.

Many helmets and hard hats end up designed to mainly protect against impacts to the top of the head. However, standards are evolving to prioritize protection against a wider range of injuries, including those caused by side impacts and rotational motion.More helmets are implementing additional safety measures through a rotational motion mitigation system. For example, there is one system that allows an inner layer inside the helmet to move slightly relative to the head during an impact, with the intention to redirect the rotational force away from the head. Thereby lowering the risk of injuries such as concussions and TBIs.

Today’s helmet designs also focus on comfort and wearability, using lightweight materials, better ventilation, and ergonomic shapes to ensure they can be worn comfortably throughout long shifts.When a helmet fits well and remains comfortable, workers are more likely to wear it consistently and correctly, which not only improves compliance with safety protocols but also fosters a culture where safety ends up being a shared priority.

Examine Your PPE

Before using any type of PPE, always check for any signs of damage or defects. If there is damage to the gear, a worker’s safety is at risk. This practice isn’t just a recommendation – OSHA, ANSI, and PPE manufacturers all require personal protective equipment undergo inspection prior to use to ensure it will perform as intended. Prioritizing regular checks of safety equipment is one of the first and easiest steps toward better workplace safety.

For workers to stay safe, they need to understand why proper PPE is essential.About 48 percent of workers say they don’t wear PPE because they don’t think it’s needed. Manufacturing workers made up 25 percent of the workers cited in this study. These numbers highlight a critical gap in workplace safety education and awareness.

By making the risks of injuries associated with rotational motion and the benefits of modern PPE standards part of everyday safety conversations, manufacturers can empower their teams to make smarter choices on the job.
Joe Brandel is business development manager for North America at Mips.

Pin It on Pinterest

Share This