When using any alternative cutting device, it is critical to follow safe work practices to prevent worker injury or damage to property, according to a report issued by the Bureau of Safety and Environmental Enforcement (BSEE).
Misuse of these alternative cutting devices often leads to injury, emphasizing the need for future continuous vigilance and strict adherence to safety protocols. Operators should discard alternative cutting devices that ended up damaged or altered, BSEE said in the advisory.
The following are some incidents reported to the BSEE:
Incident 1: While running a new cable in a cable tray, an offshore worker was using a cutter to remove previously installed zip ties. Although the protective tip of the cutter suffered damage, exposing the blade, the offshore worker continued to use the damaged cutting device. The exposed blade cut through the worker’s glove, causing a laceration on the left hand between the thumb and index finger .
Incident 2: An offshore worker sustained a laceration to the back of their hand, between the thumb and index finger, while cutting zip ties. The incident occurred when the cutting device rebounded, causing the injury. It turned out the protective guard over the blade was missing, leaving the blade exposed.
BSEE recommends operators and their contractors consider the following:
- Ensure all personnel identify the appropriate alternative cutting device in the Job Safety Analysis for the assigned task.
- Inspect the alternative cutting device before use to confirm the protective shielding is free from wear or chips and it has undergone proper installation.
- Ensure personnel do not alter or modify alternative cutting devices before use.
- Ensure personnel use cut resistant gloves for added protection when utilizing alternative cutting devices.
- Ensure if the alternative cutting device is defective in any way, the cutting device ends up discarded appropriately.


