Monitoring cathodic protection rectifiers is important to verify their proper functioning. There may be rectifiers located in areas where you have no RTUs or PLCs available to get the rectifier signals on the network and back to the SCADA.

In those cases, you will want an instrument that will measure all your rectifier signals and digitize them to be transmitted back to the SCADA.

That is where Moore Industries comes in with its Cathodic Protection Monitoring System (CPMS).

Cathodic protection is a technique that stops metal surfaces such as underground pipelines and water and fuel storage tanks, from corroding. The monitoring system ensures this anti-corrosion barrier stays active, reliable, and compliant with safety regulations.

The typical signals off a rectifier are DC output voltage 0-100V, DC current through a metering shunt. It produces0-100mV, structure to reference voltage -5V to 0 to +5V and you may have a 4-20mA signal representing rectifier temperature. Rectifiers commonly have redundant AC feeds. That means you will want to monitor the circuit breakers for each in the form of a discrete input.

Schneider Bold

Moore Industries’ CPMS can end up configured to monitor one or two rectifiers. Once the rectifier signals end up measured, they can store in MODBUS registers. A user can then read the signals either using serial MODBUS RTU or Ethernet MODBUS/TCP.

The CPMS Cathodic Protection Monitoring System monitors above and below ground impressed current cathodic protection systems to ensure proper corrosion protection is in place and operating at the right levels.

GPS can add in so it is possible to turn off banks of rectifiers to better measure pipeline voltages.

CPMS from Moore

Cathodic Protection Monitoring System from Moore Industries will help ensure the anti-corrosion barrier stays active, reliable, and compliant with safety regulations.
Source: Moore Industries

Key CPMS attributes:

  • Simultaneous dual MODBUS RTU and Ethernet communications
  • Quick and simple programming using a web browser
  • GPS Time feature provides an optional method for keeping accurate time

Click here to view the CPMS in the Moore Industries’ catalog.

Pin It on Pinterest

Share This