Moore Industries updated its TCS Temperature Concentrator System, enabling a HES HART-to-Ethernet Gateway System to work with 16-channel TCM Temperature Concentrator Modules, allowing for Ethernet-based communication with the TCS.

The TCS originally consisted of the TCM Temperature Concentrator Module and the HMC HART-to-MODBUS RTU Converter, which work together to reduce the cost of transmitting multiple temperature sensor measurements in general-purpose and hazardous area applications by concentrating and transmitting up to 32 signals over one MODBUS RTU based network.

The HES HART-to-Ethernet Gateway System is available in a single-channel or 4-channel model and can connect with up to two TCMs per channel, allowing up to eight TCMs to communicate with one HES.

This allows 128 different temperature signals to flow over an Ethernet link from the field to a MODBUS/TCP-based host. Additionally, a HART-IP-based host can read these temperature readings or they can end up viewed with any off-the-shelf web browser since the HES includes an embedded web server.

Unlike the HMC, the HES can communicate with up to sixteen HART devices per channel. Each 16-channel TCM is actually thought of as one HART device, so if two TCMs connect on a particular HES channel, 14 additional HART devices can still connect to the channel along with the TCMs.

Schneider Bold

The TCM Temperature Concentrator Module converts its signal inputs to standard HART protocol, which allows the HES to poll each TCM using a device-specific HART command. This device-specific command enables the TCM to send all 16 channel values in one HART message packet, thus increasing throughput and response time.

The TCS system can reduce the cost of transmitting multiple temperature sensor measurements in general-purpose and hazardous areas.

TCM module, equipped with 16 I/O channels, can end up configured for various input types and converts them to the HART digital protocol for long-distance transmission to a HES, HCS, or HART-based host.

The TCM Temperature Concentrator Module (left), HMC HART-to-MODBUS RTU Converter (middle) and HES HART-to-Ethernet Gateway System feature rugged metal, RFI/EMI resistant housings that snap onto standard DIN-style rails.
Source: Moore Industries


The TCS Temperature Concentrator System supports HART, MODBUS RTU, MODBUS/TCP, and HART-IP communications, allowing seamless integration with various monitoring and control systems.

Additionally, it is intrinsically safe, approved for use in hazardous areas and enables cost-effective installation by minimizing the need for dedicated transmitters and wiring.

Click here for more information on TCS product details read and download the datasheet.

Pin It on Pinterest

Share This