Cold functional testing, which is the first time the reactor systems have been operated together with the auxiliary systems at unit 3 at the Vogtle nuclear power plant near Waynesboro, Georgia, was a success, Georgia Power officials said.

Cold functional tests confirm whether components and systems important to safety are properly installed and ready to operate in a cold condition. Their main purpose is to verify the leak-tightness of the primary circuit and components – such as the pressure vessels, pipelines and valves of both the nuclear and conventional islands – and to clean the main circulation pipes.

As part of the testing, workers filled the reactor coolant system with water and pressurized above-normal operating conditions, then lowered to normal design pressure, while they conducted comprehensive inspections to verify the systems meet design standards.

Georgia Power said the completion of cold hydro testing prepares the site for the last major test remaining for unit 3, which is hot functional testing, ahead of initial fuel loading. These tests aim to simulate the temperatures and pressures which the reactor’s systems will be subjected to during normal operation.

“Every milestone achieved at the Vogtle 3 and 4 project represents another major step toward operations of the first new nuclear units in the U.S. in more than 30 years,” said Georgia Power Chairman, President and Chief Executive Paul Bowers in a World Nuclear News report. “Completion of cold hydro testing not only helps pave the way for initial fuel load, it also moves us closer to bringing online a carbon-free asset that will provide clean energy for our customers, our state and the country for the next 60 to 80 years.”

Schneider Bold

Georgia Power also said the first reactor coolant pump (RCP) at unit 3 had successfully started up, verifying the pump operates as designed. During operation, the RCPs circulate water through the reactor vessel and steam generators, providing forced flow of the reactor coolant through the reactor core, to the steam generator and then back again to support operations, according to the report.

Vogtle unit 3 shown from a photo in September.
Source: Georgia Power


In addition, the Nuclear Regulatory Commission issued operator licenses to 62 Reactor and Senior Reactor Operators for Vogtle units 3 and 4.

Construction of Vogtle unit 3 began in March 2013 and unit 4 in November the same year. Southern Nuclear and Georgia Power, both subsidiaries of Southern Company, took over management of the construction project in 2017 following Westinghouse’s Chapter 11 bankruptcy.

Construction of unit 3 is now 94 percent complete, Georgia Power said, with the total Vogtle 3 and 4 expansion project approximately 88 percent complete. The utility said it continues to expect to meet the November 2021 and November 2022 regulatory-approved in-service dates for units 3 and 4, respectively.

Pin It on Pinterest

Share This