NY Auto Parts Maker Faces Repeat Safety Fines

Tuesday, September 6, 2016 @ 01:09 PM gHale

Automotive parts manufacturer, York Metal Toll Processing Inc. is facing $218,502 in fines for exposing employees to uncorrected electrical, crushing and respiratory hazards, as well as recurring amputation hazards, said officials at the Occupational Safety and Health Administration (OSHA).

OSHA investigators opened two follow-up inspections at the company’s Syracuse, NY, manufacturing facility March 14, after the employer failed to provide evidence they corrected violations cited during previous OSHA inspections. One of the previous inspections occurred as a result of an employee’s hand ended up amputated by a power press.

Amputation at OH Plastic Maker
Flash Fires Lead to Safety Inspections
Amputation Leads to Tyson Foods Safety Fine
IL Trailer Maker Faces Repeat Safety Fines

Agency inspectors found that York Metal Toll Processing failed to:
• Ensure electrical equipment used in a powder coat booth conformed with electrical standards
• Properly guard live electrical parts to prevent contact with energized circuits
• Safely remove powder coat via exhaust ducts to a powder recovery system
• Adequately train workers performing inspections and maintenance on power presses
• Inspect mechanical power presses
• Ensure lockout/ tag out procedures were specific to equipment in the facility
• Perform annual lockout/ tag out procedure inspections
• Train employees who wear respiratory equipment, and provide medical evaluations to ensure that they can wear a respirator safely
• Provide proper ventilation for welders working in spaces less than 10,000 cubic feet
• Inspect steel slings used for hoisting
• Maintain passageways and aisles in passable condition

“York Metal Toll Processing has disregarded employee safety by failing to correct obvious electrical, crushing, and respiratory hazards, and also for allowing new and recurring hazards to exist,” said Chris Adams, OSHA’s area director in Syracuse. “For the safety and well-being of its employees York Metal Toll Processing must recognize the severity of these hazards and correct them once and for all.”

As a result of the follow-up inspections, OSHA has issued York Metal Toll Processing citations for failure to abate fourteen previously cited violations, four repeat violations, and three serious violations.

Leave a Reply

You must be logged in to post a comment.