As a production manager attempted to clear plastic parts stuck in a thermoforming machine, he became trapped when the machine’s conveyor cycled automatically and was fatally crushed at a Cambridge, Ohio, plastics plant.
An investigation by Occupational Safety and Health Administration (OSHA) officials found if Encore Industries Inc. – operating as Encore Plastics Corp./IPL Global – had remedied failures that contributed to the incident, a life could have been saved.
Investigators found the company continued to perform service and maintenance tasks after identifying machine components continued to move after opening an interlocked machine enclosure door.
The company also failed to ensure its energy control procedures included steps needed to shut down and de-energize the machine, investigators said. OSHA also found Encore Industries failed to audit machine safety procedures periodically for effectiveness and train employees on their use.
Compounding the tragedy, investigators learned two similar incidents occurred on the same machine – one on the day of the fatal incident and another two days prior – adding to the tragic nature of the investigation. In the two prior incidents, workers barely escaped injury.
“Our investigation found Encore Industries removed jams and performed other service and maintenance tasks with the knowledge that its inadequate and failing lockout tagout procedures exposed its workers to the risks associated with moving machine parts,” said OSHA Area Director Larry M. Johnson in Columbus, Ohio. “The company ignored reports of malfunctioning equipment and near misses. By doing so, Encore Industries failed to prevent this terrible tragedy and the avoidable loss of a family member and co-worker.”
During its investigation at Encore, OSHA opened a second investigation after a complaint alleged safety hazards in its warehouse. There, investigators found the company had failed to train workers on safe operation of forklifts and did not keep passageways and emergency exits clear or adequately marked, as the law requires.
In total, the investigations led OSHA to issue citations for one willful, one repeat, five serious and two other safety violations to Encore Industries. In 2020, OSHA issued citations to Encore Industries for violating lockout/tag out standards twice at this facility.
The company faces $291,086 in fines.
Encore Industries is a subsidiary of IPL, a global packaging provider for food, consumer, agricultural, logistics and environmental end-markets. The company manufactures products at 20 facilities located in Canada, the U.S., Ireland, the U.K., and China, and operates three research and development facilities in Canada and the U.S. Its Cambridge facility manufactures plastic buckets, lids and paint trays.
OSHA’s machine guarding and control of hazardous energy webpages provide information on what employers must do to limit worker exposure to machine hazards.


Clearing of jams and other routine production issues is NOT a LOTO issue; it’s a safeguarding issue. Relying on elective procedures only works in the near term and eventually goes overlooked until another catastrophe strikes.
LOTO should only be reserved for use by qualified mechanics and skilled trades where such safeguarding is impracticable. Skilled trades are much more disciplined than most production workers or they wouldn’t be for long if they weren’t. There are not that many unsafe electricians around for a reason.
OHSA, get your SH!& together.