Cisco has fixes available to handle critical SaltStack FrameWork vulnerabilities in its Modeling Labs Corporate Edition (CML) and Virtual Internet Routing Lab Personal Edition (VIRL-PE) where there have been attacks against the products.

One month ago, on April 29, the Salt Open Core team notified their community regarding the following two CVE-IDs:

  • CVE-2020-11651: Authentication Bypass Vulnerability
  • CVE-2020-11652: Directory Traversal Vulnerability

Cisco’s CML and Virtual Internet Routing Lab Personal Edition (VIRL-PE) use a version of SaltStack running the salt-master service affected by these vulnerabilities.

Cisco released software updates that address these vulnerabilities, where a remote attacker could take control of an affected system. In addition, there is a workaround that addresses these vulnerabilities, Cisco said in an advisory.

Schneider Bold

These vulnerabilities affect the following Cisco products if they are running a vulnerable software release:

  • Cisco Modeling Labs Corporate Edition (CML)
  • Cisco Virtual Internet Routing Lab Personal Edition (VIRL-PE)

Cisco CML and Cisco VIRL-PE can end up deployed either in standalone or cluster configurations. The vulnerabilities will impact each deployment differently.

Cisco infrastructure maintains the salt-master servers used with Cisco VIRL-PE. Those servers were upgraded on May 7, 2020. Cisco identified the Cisco maintained salt-master servers servicing Cisco VIRL-PE releases 1.2 and 1.3 ended up compromised.

The servers ended up remediated on May 7. The following servers were compromised:

  • us-1.virl.info
  • us-2.virl.info
  • us-3.virl.info
  • us-4.virl.info
  • vsm-us-1.virl.info
  • vsm-us-2.virl.info

Cisco VIRL-PE connects back to Cisco maintained Salt Servers running the salt-master service. These servers are configured to communicate with a different Cisco salt-master server, depending on which release of Cisco VIRL-PE software is running. Administrators can check the configured Cisco salt-master server by navigating to VIRL Server > Salt Configuration and Status.

Cisco CML does not connect back to any Cisco maintained Salt Servers.

For Cisco CML and Cisco VIRL-PE software releases 1.5 and 1.6, if the salt-master service is enabled, the exploitability of the product depends on how the product has been deployed, researchers aid. To be exploited, the salt-master service must be reachable on TCP ports 4505 and 4506. For any installation found with salt-master service running Cisco would recommend either inspecting the machine for compromise or doing a re-image of the machine and installing the latest version of Cisco CML or Cisco VIRL-PE.

To check the status of the salt-master service on the installation of Cisco CML and Cisco VIRL-PE, log in to the device and execute the command sudo systemctl status salt-master. If the salt-master service is active, as indicated by Active: active (running), the device is vulnerable.

Cisco Product Security Incident Response Team (PSIRT) became aware of additional attempted exploitation of these vulnerabilities in the wild. Cisco continues to recommend users upgrade to a fixed software release to remediate these vulnerabilities.

Pin It on Pinterest

Share This