Toxic Chemicals Released in LA Blast

Thursday, June 27, 2013 @ 06:06 PM gHale

The deadly June 13 blast and fire at the Williams Olefins chemical plant in Geismar, LA, released more than 62,000 pounds of toxic chemicals during the accident that killed two workers and injured 114 others, a new report said.

The facility released 31,187 pounds of volatile organic carbon material; 23,090 pounds of propylene; 2,398 pounds of ethylene; 5,621 pounds of other volatile organic carbon materials, including propane; and 48 pounds of benzene, according to the report filed with the state Department of Environmental Quality (DEQ).

Chemical Waste Fire Out – Again
Chemical spill Forces Evacuation
Open Valve Brings Big Chemical Spill
New Leak Springs from DuPont Acid Breach

The cause of the blast and fire are still under investigation, although investigators are focusing on a heat exchanger and piping associated with the manufacturing column that extracts propylene from natural gas. A company spokesman said Tuesday two contract workers injured in the blast remained hospitalized.

At the time of the accident, air monitoring did not detect harmful amounts of chemicals in the air, but there was a “shelter in place” advisory for residents to remain in their homes, with windows and doors shut, Environmental Protection Agency (EPA) officials said at the time. DEQ reported monitoring on the day of the accident and the two days afterward found no unsafe levels of chemicals and that Williams Olefins reported its air monitoring also showed no measurable levels of chemicals in the air.

But a survey of 67 people living near the plant by a team of volunteers working with the Louisiana Bucket Brigade took note of 24 people who reported health problems after the accident, ranging from respiratory and eye irritations to headaches and nausea. The Brigade’s survey was a day after the explosion near the Jackie Robinson playground in Geismar.

The chemical releases included liquids and gases that escaped during the fire, which lasted from 8:37 a.m. until shortly after noon, and gases and particles released from flares until about 4:30 p.m., the report said.

Some water used to fight the chemical fire ended up captured in tanks or holding areas on site, according to the report, but some of that water left the plant site in storm drains or as sheet flow across the property. A June 18 report by Williams Olefins to DEQ said the wastewater releases may have violated the company’s permits for discharge of wastewater, including for benzene, ethylbenzene and toluene.

The fire caused significant damage at the chemical plant, which was undergoing a $400 million expansion. When the expansion is complete, the plant will be able to manufacture 1.95 billion pounds of chemicals a year.

In a news release Monday, the company said the scope of damage remains unclear.

“The plant remains shut down and the expansion work that was occurring is temporarily suspended,” the company said. “Neither the full extent of the damage nor the time needed to make repairs is known.”

The accident is under investigation by the federal Occupational Safety and Health Administration, the independent federal Chemical Safety Board, EPA and DEQ.

“At this point it is too early to determine how long the investigation will last, but statutorily, OSHA has up to six months to complete the investigation,” said Juan Rodriguez, a spokesman in OSHA’s Dallas office.

“It is too early in the investigation to comment,” said Rodney Mallett, a spokesman for the state DEQ. “We wouldn’t want to jeopardize the ongoing DEQ investigation, much less interfere with the other agencies.”

“We are working in a cooperative and transparent manner with OSHA and CSB through this process,” said Keith Isbell, a Williams Olefins spokesman.

Leave a Reply

You must be logged in to post a comment.