Transformer Oil Spill in NYC

Thursday, May 18, 2017 @ 12:05 PM gHale

Cleanup is continuing in the East River in New York City after oil from a substation transformer spilled last week.

Crews were rushing to cover up parts of the Con Edison substation where the spill originated so heavy rains wouldn’t cause more oil to leach into the river.

NY Plant’s Chlorine Gas Leak Forces Evac
Offshore Platform Gas Detector Triggers
Drone Swarms Map Oil Spills
Firm Fined in Gulf Safety Cases

Con Edison said about 30,000 gallons of insulating oil leaked after a transformer at a substation John Street failed. Most of it went into the soil on the property, which is now being excavated, and then some seeped into the river. So far, 560 gallons have been recovered from the water.

“If you have a vessel that holds that much oil you should have some kind of spill containment around it,” said Patrol Boat Captain John Lipscomb, the vice president of advocacy for the watchdog group Riverkeeper. “It certainly shouldn’t be over porous ground.”

He added that recovering all the oil that leaked into the river will likely be impossible. He said that once the oil gets outside the booms it is carried away by the strong currents.

“We deeply regret this happened and we are doing everything possible to make sure we conduct the cleanup as safely, thoroughly and quickly as possible,” said Andrea Schmitz, Con Edison’s vice president of environment, health, and safety. “We are grateful to the U.S. Coast Guard, the New York State Department of Environmental Conservation, New York City Emergency Management, and all the other agencies for their assistance, and we appreciate the patience of boaters and the community.”

The oil is a light mineral oil, which Con Ed acknowledged can impact fish or wildlife in heavy concentrations. The utility said oil samples collected contained low levels of polychlorinated biphenyls, or PCBs, which pose minimal hazard to the public.

Leave a Reply

You must be logged in to post a comment.