The new thinner UL approved Moore Industries ECT-DIN 2-Wire Isolator is now available in a narrow, 15mm aluminum housing and retains the same General and Hazardous area approvals as the rest of the ECT family of isolators.
The complete ECT family is rugged and available with enhanced features delivering signal isolation and conversion solutions for the most demanding locations as well as ambient and noisy installation conditions.
The ECT is available in 2-wire output loop powered model in a narrow 15mm housing, 2-wire input-loop powered model, and 4-wire (line/mains) powered models. The complete family delivers economical solutions for an expansive range of signal interface applications such as:
- Isolate Signals to stop erratic measurements caused by ground loops.
- Convert Signals so field instruments can interface directly with an indicator, recorder, DCS, PLC or PC-based SCADA system.
- Split One Signal to allow one primary measurement to be sent to two separate systems.
- Two isolators in one. The ECT is available in dual channel I/O models that provide application flexibility while reducing space requirements and costs.
- Protect Equipment and Signals (Area Isolation) by eliminating common electrical paths.
- Amplify (Boost) Signals so that more instruments can be added to an overburdened loop.
- Solve “Bucking” Power Supplies by stopping a conflict caused by a 4-wire transmitter and a DCS both trying to power the same process loop.
- Step Down Dangerous, high voltage signals to safer levels to protect plant personnel.
- Solve DCS Start-Up Problems caused by non-isolated transmitters by installing an ECT in each troublesome loop.
Click here for more information.

