As demand for lighter and smaller wearable devices and high functional IoT tools rise, there is a growing need for new technologies for power collection, storage, and management.
Wearable devices and IoT products are increasingly applied to various sectors of the society these days and researchers are in the process of developing energy storage devices with additional functions besides power supply.
Preconditions of wearable energy storage devices are they should be able to change their forms along with changing shapes of human body and movements while being flexible, safe to use, and providing excellent durability.
Conventional batteries were not flexible as they were developed to have a cylindrical, prismatic, or pouch type base structure and had limited energy densities. So, they had some limitations to be applied to next-generation products such as wearable devices or micro devices that require high flexibility, portability and areal or volumetric energy densities.
In the past, R&D efforts to develop energy storage devices for wearable devices were mostly put on Li thin-film batteries. Li thin-film microbatteries, which are widely and commercially available power sources for microelectronics, suffer from short life cycles, abrupt failures, unstable low-temperature kinetics, and pose safety concerns when associated with lithium.
Now, micro-supercapacitors (MSCs) are gaining attention as next-generation energy storage devices to replace Li thin-film batteries.
In principle, the supercapacitors were semi-permanent to use and had many benefits such as high power densities (10 times more compared with lithium ion batteries), stability, efficiency and fast charge/discharge rates. However, their scope of use was somewhat limited to certain areas due to a low energy density per load (which was estimated as 1/10 of Li batteries).
Compared to supercapacitors, MSCs have a significantly higher power density than lithium batteries and energy densities are similar or even higher than their rivals. That is why they are considered as an alternative for ultra-thin high-performance energy storage devices.

Re-attachable and flexible rechargeable batteries available to use in next-generation flexible/wearable devices.
Source: Korea Institute of Energy Research (KIER)
That is where Dr. Hana Yoon at Energy Conversion & Storage Materials Laboratory of Korea Institute of Energy Research (KIER,), Professor Kim Young-Jin (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology) and Professor Kim Seungchul (Dept. of Optics and Mechatronics Engineering, Pusan National University) come in. They jointly developed re-attachable micro-supercapacitors (MSCs) using highly swollen laser-induced-graphene electrodes.
This team successfully developed sticker-type flexible MSCs that had a flexible structure and can attach everywhere on objects or surfaces by using ultrashort-pulse-lasers.
Ultrashort-pulse laser can instantly generate strong intensity to make highly swollen graphene electrodes. By impregnating adhesive polymer composites to the inside of highly swollen graphene, the researchers were able to develop sticker-type MSCs with excellent electrodes performance and durability while maintaining adhesiveness.
Dopamine, a functional mimic of the adhesive protein of mussel, ended up used as a coating material for the sticker-type flexible MSCs to improve electrochemical performance. The catechol groups in dopamine provide redox-active moieties for pseudocapacitive electrodes. By doing so, they were able to develop sticker-type flexible energy storage devices that had high volumetric energy densities similar to that of lithium thin-film batteries with excellent volumetric power density, 13 times greater than that of their counterparts.
“Our sticker-type flexible MSCs are easily re-attached to next-generation wearable devices and IoT gadgets and are eco-friendly,” Yoon said. “They are expected to solve many obstacles of lithium based energy storage technologies.”
“The patterning technology developed from this study generated unique swollen graphene with ultrashort-pulse-laser in a relatively short period time, while minimizing loss of materials,” said KAIST professor, Young-jin Kim, a co-researcher of the study. “This technology has a potential to promote industrial applications of laser-induced-graphene to various sectors.”

