Elecbrakes has an update available to handle exposed dangerous method or function, authentication bypass by capture-replay, and missing authentication for critical function vulnerabilities in its EB2, according to a report with CISA.

Successful exploitation of these vulnerabilities, discovered by Patrick Forck and Jeremy McCarthy of Element Digital, could allow an attacker to gain control of the brakes of a trailer, modify the firmware, disable the brake lights, modify the brake conditions or disable other critical safety features.

Elecbrakes EB2 is a trailer-mounted electric brake controller designed to manage electric and electric-over-hydraulic trailer brakes without hardwiring a controller inside the tow vehicle.

The following versions of Elecbrakes EB2, VM1, ELBC2000 suffer from the vulnerabilities:

  • EB2 up to and including version 3.0.4.2.0
  • ELBC2000 all versions
  • VM1 up to version 1.3.4.2.1

In one issue, the affected product uses an unprotected firmware-update channel, which may allow for unauthorized firmware modification.

Schneider Bold

CVE-2026-124281 is the case number for the vulnerability, which has a CVSS V3 base score of 6.1. There is also a V4 base score of 5.3.

Additionally, no replay or command-integrity protection. Commands lack sequence numbers, nonces, or session tokens; captured commands can end up replayed, and the last command persists across sessions.

CVE-2026-125273 is the case number for the vulnerability, which has a CVSS V3 base score of 9.6. There is also a V4 base score of 8.5.

Unauthenticated Command Injection

Also, the affected product has an unauthenticated command injection, which may allow an in-range BLE device to gain access to write to the control interface and influence braking with no authentication or pairing.

CVE-2026-96805 is the case number for the vulnerability, which has a CVSS V3 base score of 9.6. There is also a V4 base score of 8.5.

The product sees use mainly in the transportation systems sector. It sees action in Australia and New Zealand.

No exploits target these vulnerabilities.

In terms of mitigations:

For CVE-2026-124281:
  • Elecbrakes EB2 up to and including version 3.0.4.2.0, update firmware (EB2 3.0.4.4.3). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes VM1 up to version 1.3.4.2.1, update firmware (VM1 1.3.4.2.1). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes ELBC2000 all versons, this device is the predecessor to the EB2 and the VM1 and is no longer for sale. The vendor is determining how to address these vulnerabilities for this particular controller.
CVE-2026-125273:
  • Elecbrakes EB2 up to and including 3.0.4.2.0, update firmware (EB2 3.0.4.4.3). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes VM1 up to version 1.3.4.2.1, update firmware (VM1 1.3.4.2.1). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes ELBC2000 all versions this device is the predecessor to the EB2 and the VM1 and is no longer for sale. The vendor is determining how to address these vulnerabilities for this particular controller.
  • Elecbrakes EB2 up to and including 3.0.4.2.0, update firmware (EB2 3.0.4.4.3). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes ELBC2000 all versions, this device is the predecessor to the EB2 and the VM1 and is no for sale. The vendor is determining how to address these vulnerabilities for this particular controller.
  • Elecbrakes VM1 up to version 1.3.4.2.1 update firmware (VM1 1.3.4.2.1). Users should open the Elecbrakes app and install the firmware update.
CVE-2026-96805:
  • Elecbrakes EB2 up to and including version 3.0.4.2.0 update firmware (EB2 3.0.4.4.3). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes VM1 up to version 1.3.4.2.1 update firmware (VM1 1.3.4.2.1). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes ELBC2000 all versions this device is the predecessor to the EB2 and the VM1 and is no for sale. The vendor is determining how to address these vulnerabilities for this particular controller.
  • Elecbrakes EB2 up to and including 3.0.4.2.0 update firmware (EB2 3.0.4.4.3). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes ELBC2000 all versions this device is the predecessor to the EB2 and the VM1 and is no for sale. The vendor is determining how to address these vulnerabilities for this particular controller.
  • Elecbrakes VM1 up to version 1.3.4.2.1 update firmware (VM1 1.3.4.2.1). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes ELBC2000 all versions this device is the predecessor to the EB2 and the VM1 and is no for sale. The vendor is determining how to address these vulnerabilities for this particular controller.
  • Elecbrakes EB2 up to and including 3.0.4.2.0 update firmware (EB2 3.0.4.4.3). Users should open the Elecbrakes app and install the firmware update.
  • Elecbrakes VM1 up to version 1.3.4.2.1 update firmware (VM1 1.3.4.2.1). Users should open the Elecbrakes app and install the firmware update.

For more information, click on the CSAF.

Pin It on Pinterest

Share This