These risks are notably prevalent during calm weather conditions with light winds, enabling CO to ascend from lower decks, said investigations conducted by the Bureau of Safety and Environmental Enforcement (BSEE). There is a potential for CO to accumulate in isolated areas, corridors, and even enter environmental control intakes, putting personnel at risk of critical CO exposure.
Several inspections conducted during calm weather events revealed alarmingly elevated CO levels within living quarters, control rooms, galley areas, and other spaces across various offshore facilities.
Exposure to high levels of CO can lead to symptoms such as headaches, confusion, breathlessness, collapsing, nausea, dizziness, tiredness and stomach pains. Severe exposure cases have the potential to be fatal.
Some of the commonly used stationary CO gas detection devices on offshore facilities have alarm thresholds set at a minimum of 70 parts-per-million (ppm) for over an hour and 150 ppm for 10-50 minutes before triggering an alarm. This poses a significant risk of prolonged exposure to CO well beyond allowable limits, potentially resulting in severe health consequences.
Regularly calibrated portable/personal four-way gas detectors are the most reliable means of detecting CO accumulations, especially in areas that might otherwise go undetected, according to the BSEE.
In light of these recent findings, there should be necessary actions to mitigate exposure. It is imperative to conduct assessments of various machinery emitting CO to identify potential exposure risks. Additionally, it is essential for individuals to familiarize themselves with exposure limits and recognize potentially harmful exposure incidents.
Furthermore, it is crucial to adhere to the exposure standards established by the National Institute for Occupational Safety and Health (NIOSH) and the Occupational Safety and Health Administration (OSHA). These standards include:
- NIOSH time-weighted average (TWA) limits of 35 ppm with an upper limit of 200 ppm
- OSHA sets the TWA at 50 ppm
- OSHA Permissible Exposure Limit (PEL) for CO, also set at 50 ppm
- OSHA standards that prohibit worker exposure to more than 50 ppm during an 8-hour period
- The 8-hour PEL for CO in maritime operations is also 50 ppm
- Additionally, maritime workers must end up removed from exposure if the ambient CO concentration exceeds 100 ppm
In accordance with 29 CFR 1926. 55 (a)-(b), there must be limits for employee exposure and engineering controls methods should end up implemented to mitigate exposure to hazardous substances, including CO, according to the BSEE. Therefore, it is advisable to follow the procedures outlined in 29 CFR 1926.57 (a)-(d)(2) for CO emissions, with specific attention to 29 CFR 1926.57(f)(1)(viii) as a guide for effective ventilation practices to mitigate exposure to harmful substances.
BSEE also recommends operators and their contractors consider the following:
- Ensure ventilation is properly functioning and backup sources of ventilation are available. Ventilation should move the CO away from heavily trafficked areas, living quarters, and offices, preferably to a higher area to minimize the risk of exposure.
- Regularly verify the integrity of exhaust piping to ensure correct configuration, remains free from obstructions, and well-maintained. Routinely inspect this configuration to confirm the absence of corrosion, holes, or any other damage.
- Ensure personnel are aware of CO poisoning and illnesses, can recognize the symptoms, and know the treatments.
- Use signage or other clearly identifiable means to call attention to the areas prone to create CO, such as generators, gas-powered equipment, etc.
- There must be careful considerations for the planning and placement of CO-exhausting machinery so CO cannot accumulate in high traffic or living areas directly above machinery. If unable to change the configuration, pipe the CO away from these areas.
- Ensure any gas detection equipment undergoes regular inspection, maintenance, calibration, and ends up properly worn by all personnel aboard the offshore facility.
- Regularly reviewing NIOSH and OSHA CO occupational exposure information found in the NIOSH Workplace CO Exposure and OSHA CO Fact Sheet.

