However, the catch is, despite these benefits, challenges remain, including a limited range of detectable gases and slow response times.
But that may soon end as a research team including Inkyu Park from the Korea Advanced Institute of Science and Technology (KAIST), Sang-Wan Ryu from Chonnam National University, and Ho Won Jang from Seoul National University, developed a blue μLED-integrated gas sensor array based on SnO2 nanoparticles (NPs).
This array exhibits excellent sensitivity, tunable selectivity, and rapid detection with microwatt-level power consumption.
Using the finite-difference time-domain (FDTD) method, Park and colleagues simulated the light absorption of SnO2 nanoparticles under varying light intensities.
By assuming a densely packed spherical structure of SnO2 NPs, they obtained simulated absorption distributions along the z-axis under light intensities of 50, 200, and 500 mW cm-2. At lower light intensities, the lowest layer of SnO2 NPs ended up fully activated and reacted with NO2.
Since the number of photogenerated carriers was far less than the molar quantity of NO2, all carriers reacted with NO2 molecules. As the light intensity increased, more layers of SnO2 NPs became activated, leading to a greater number of NO2 molecules reacting. Once the activated layers matched the thickness of the sensor’s electrode, the sensor’s response peaked.
However, when the activation depth of SnO2 NPs exceeded the electrode thickness due to excessive light intensity, the sensor’s response diminished. Upon introducing NO2, most molecules reacted with SnO2 NPs on the top layer, resulting in increased resistance in the upper layers, with the lower layers experiencing only a slight increase.
Consequently, the majority of the current passed through the lower layers, which had lower resistance, leading to a reduced sensor response. Across these stages, the response curve exhibited a volcano-like pattern with respect to light intensity, highlighting the synergistic effects of the SnO2 material properties and sensor device architecture on gas-sensing performance.
Furthermore, the gas-sensing performance of Au-SnO2 NPs, Pd-SnO2 NPs, and Pt-SnO2 NPs toward NO2 ended up studied under light exposure. Compared to SnO2 NPs, the response to 5 ppm of NO2 decreased for Au-SnO2 NPs, Pd-SnO2 NPs, and Pt-SnO2 NPs, with Pt-SnO2 NPs showing the most significant reduction.
When the reducing gases NH3, CO, H2, C2H5OH, and CH3COCH3 ended up tested under blue light, all sensors displayed distinct selectivity patterns.
Polarization diagrams of SnO2 NPs, Au-SnO2 NPs, Pd-SnO2 NPs, and Pt-SnO2 NPs toward the reducing gases revealed SnO2 NPs showed moderate responses to NH3, CO, and C2H5OH, while Au-SnO2 NPs exhibited high sensitivity and selectivity to C2H5OH. Pd-SnO2 NPs responded well to H2, and Pt-SnO2 NPs displayed strong responses to various gases, particularly NH3.
In the end, noble-metal-modified SnO2 NP-based gas sensor arrays demonstrated the ability to distinguish a wide variety of gases under light illumination. This work should advance μLED-based gas sensors, expanding the range of detectable gases and contributing to healthier living environments.

