There is now a fuel cell in development with such flexibility that it can switch between storing or making electricity and also generate hydrogen from water.

Additionally, unlike similar technologies, the fuel cell can withstand the heat and steam generated when running on an industrial scale for long periods at high power. Furthermore, it addresses the three big problems with existing designs for a potentially valuable energy technology called a “protonic ceramic electrochemical cell (PCEC).”

Since PCECs switch between energy storage and power production, they could be a strong technology for an overwhelmed U.S. electrical grid struggling to incorporate the energy it receives at uncertain intervals from multiple sources, said Researcher Xingbo Liu, materials science professor and associate dean for research at the West Virginia University Benjamin M. Statler College of Engineering and Mineral Resources.

Those multiple sources include conventional power plants, hydropower dams as well as residential solar panels and even ocean waves.

Conformally Coated Scaffold

However, Liu said current PCEC designs “are unstable in high steam environments, with weak connections between layers and they perform poorly at the critical task of conducting protons. In response, our group built a ‘conformally coated scaffold’ (CCS) design by connecting electrolytes, and we coated and sealed it with an electrocatalyst layer that’s stable in steam, absorbs water and stays intact as temperatures rise and fall. Protons, heat and electricity can all move through the structure.”

Schneider Bold

Their prototype did its job for over 5,000 hours, at 600 degrees Celsius and 40 percent humidity, breaking apart molecules to produce electricity and hydrogen through the process of electrolysis. The previous longest time a small PCEC continuously performed the same process was 1,833 hours — and in that case, performance degraded over time, Liu said.

“That technology wasn’t ready for large-scale applications,” Liu said. “By comparison, our conformally coated scaffold design did so well in both energy storage and energy production modes that we also built a test version of a system that uses CCS cells to store hydrogen and use it in electrolysis reactions. Our system stayed stable while switching smoothly and frequently back and forth between those modes, even over long 12-hour cycles. This is how we achieve balance in a power grid that’s evolving to incorporate intermittent, sustainable sources of energy.”

The results appear in a paper written by Hanchen Tian, a WVU doctoral student and postdoctoral researcher at the time of the study, and Wei Li, then a WVU research assistant professor.

New Coating Needed

Fuel cell development

A research team led by Xingbo Liu, a WVU materials engineer, developed a device that can make and store electricity despite intense heat and steam, which could help build an electric grid capable of adapting to changes in energy supply and demand.Source: WVU Photo/Micaela Morrissette

“PCECs use membranes called electrolytes and conductors called oxygen electrodes to move protons through their layers,” Tian said. “But steam has been getting to the electrolytes in current PCEC designs and causing them to fail over time. Another problem is that the electrolytes and electrodes expand differently under heat, so the connections between them weaken during use.”

The WVU team incorporated the barium ion to help the coating hold water, which facilitates proton movement.

They also incorporated nickel ions to manufacture larger CCS cells that stayed stable and flat. And because their PCEC runs on water vapor, it can end up powered with saltwater or low-quality water, rather than purified water.

“All that shows promise for scaling up to industrial levels,” Tian said. “We showed that it’s possible to make, on a large scale, CCS fuel cells that will stay strong and stable under intense conditions.”

Pin It on Pinterest

Share This