An inspection design method and procedure where mobile robots can inspect large pipe structures and find multiple defects on a three-meter long steel pipe using guided acoustic wave sensors is now in development.

A new approach is under development to review a long steel pipe with multiple defects, including circular holes with different sizes, a crack-like defect and pits, through a designed inspection path to achieve 100 percent detection coverage for a defined reference defect, according to a study from a team of researchers at the University of Bristol, led by Professors Bruce Drinkwater and Anthony Croxford.

Researchers showed how they were able to effectively examine large plate-like structures using a network of independent robots, each carrying sensors capable of sending and receiving guided acoustic waves, working in pulse-echo mode.

This approach has the major advantage of minimizing communication between robots, requires no synchronization and raises the possibility of on-board processing to lower data transfer costs which could reduce overall inspection expenses. Researchers divided the inspection into a defect detection and a defect localization stage.

“There are many robotic systems with integrated ultrasound sensors used for automated inspection of pipelines from their inside to allow the pipeline operator to perform required inspections without stopping the flow of product in the pipeline,” said Dr. Jie Zhang, the study’s lead author. “However, available systems struggle to cope with varying pipe cross-sections or network complexity, inevitably leading to pipeline disruption during inspection. This makes them suitable for specific inspections of high value assets, such as oil and gas pipelines, but not generally applicable.

Schneider Bold

“As the cost of mobile robots has reduced over recent years, it is increasingly possible to deploy multiple robots for a large area inspection. We take the existence of small inspection robots as its starting point, and explore how they can be used for generic monitoring of a structure. This requires inspection strategies, methodologies and assessment procedures that can be integrated with the mobile robots for accurate defect detection and localization that is low cost and efficient.

“We investigate this problem by considering a network of robots, each with a single omnidirectional guided acoustic wave transducer. This configuration is considered as it is arguably the simplest, with good potential for integration in a low cost platform,” he said.

The methods employed are generally applicable to other related scenarios and allow the impact of any detection or localization method decisions to be quickly quantified.

Robot inspecting a pipe proved is can detect multiple defects using guided acoustic wave sensors.
Source: Dr Jie Zhang and team


The methods could end up used across other materials, pipe geometries, noise levels or guided wave modes, allowing the full range of sensor performance parameters, defects sizes and types and operating modalities to be explored.

Also, the techniques can assess the detection and localization performance for specified inspection parameters, for example, predict the minimum detectable defect under a specified probability of detection and probability of false alarm.

The team will now investigate collaboration opportunities with industries to advance current prototypes for actual pipe inspections.

Pin It on Pinterest

Share This