Lignin, a natural ingredient of wood that provides support and rigidity, can end up developed into a thin film separator for use inside lithium-ion batteries to prevent short circuits that can cause a fire, said Chengcheng Fang, assistant professor in the Michigan State University College of Engineering, and Mojgan Nejad, an associate professor in the College of Agriculture and Natural Resources.
“We wanted to build a better battery,” said Fang. “But we also wanted it to be safe, efficient and sustainable.”
Without the protection of the separator, the cathode and anode sides of the battery have the potential to touch, causing an accidental short circuit and possible fire or explosion.
Wood Stayed Stable
In contrast, the lignin-based separators developed remained stable and didn’t become smaller in size up to temperatures of 300 degrees Celsius.
Fang and her team tested varying thicknesses of lignin and found that films measuring 25 micrometers, which is thinner than one quarter of a human hair, were the most effective at keeping the inside of the battery stable and keeping the anode and cathode from connecting.
Using the lignin film inside the battery had another benefit: The increased stability inside the battery also resulted in an improved cycle life, or how many times the battery can end up charged and used.

Image on left: A wood-based separator uses lignin wood material to separate the cathode from the anode inside a lithium-ion battery to reduce the fire and explosion risk and improve the battery’s life. Image on the right: A typical separator inside a lithium-ion battery uses a plastic material to separate the cathode from the anode that can shrink at high temperatures, exposing the cathode and anode to a possible short circuit that could cause a fire or explosion.
Source: Michigan State University/Molly Killingbeck
“We were surprised to see that the lignin film also improved the battery’s cycle life,” said Fang. “We increased the battery’s cycle life by 60 percent.”
A third advantage of this research is an environmentally friendly one. The team was able to manufacture the lignin separators using a low-cost dry processing method. This meant the team was able to produce large quantities of the lignin film, on demand, while avoiding the use of harmful solvents commonly used in traditional separator manufacturing, which can be harmful to the environment.
Environmentally Safe
In this case, researchers were able to use lignin and other materials that provided a 100 percent raw material conversion to create a film without creating any waste or pollution.
“Lignin, particularly lignosulfonate, is naturally abundant and it doesn’t need any further treatment to function in batteries,” Fang said. “This work demonstrates a new design pathway to improve both the safety and manufacturability of battery materials.”

